Source code for pygmt.src.rose

"""
rose - Plot windrose diagrams or polar histograms.
"""

from pygmt.clib import Session
from pygmt.helpers import (
    build_arg_string,
    deprecate_parameter,
    fmt_docstring,
    kwargs_to_strings,
    use_alias,
)


@fmt_docstring
@deprecate_parameter("columns", "incols", "v0.4.0", remove_version="v0.6.0")
@use_alias(
    A="sector",
    B="frame",
    C="cmap",
    D="shift",
    Em="vectors",
    F="no_scale",
    G="color",
    I="inquire",
    JX="diameter",
    L="labels",
    M="vector_params",
    Q="alpha",
    R="region",
    S="norm",
    T="orientation",
    U="timestamp",
    V="verbose",
    W="pen",
    X="xshift",
    Y="yshift",
    Z="scale",
    i="incols",
    c="panel",
    p="perspective",
    t="transparency",
)
@kwargs_to_strings(R="sequence", c="sequence_comma", i="sequence_comma", p="sequence")
def rose(self, length=None, azimuth=None, data=None, **kwargs):
    """
    Plot windrose diagrams or polar histograms.

    Takes a matrix, (length,azimuth) pairs, or a file name as input
    and plots windrose diagrams or polar histograms (sector diagram
    or rose diagram).

    Must provide either ``data`` or ``length`` and ``azimuth``.

    Options include full circle and half circle plots. The outline
    of the windrose is drawn with the same color as
    :gmt-term:`MAP_DEFAULT_PEN`.

    Full option list at :gmt-docs:`rose.html`

    {aliases}

    Parameters
    ----------
    length/azimuth : float or 1d arrays
        Length and azimuth values, or arrays of length and azimuth
        values

    data : str or {table-like}
        Pass in either a file name to an ASCII data table, a 2D
        {table-classes}.
        Use option ``columns`` to choose which columns are length and azimuth,
        respectively. If a file with only azimuths is given, use ``columns`` to
        indicate the single column with azimuths; then all lengths are set to
        unity (see ``scale = 'u'`` to set actual lengths to unity as well).

    orientation : bool
        Specifies that the input data are orientation data (i.e., have a
        180 degree ambiguity) instead of true 0-360 degree directions
        [Default is 0-360 degrees]. We compensate by counting each record
        twice: First as azimuth and second as azimuth +180. Ignored if
        range is given as -90/90 or 0/180.

    region : str or list
        *Required if this is the first plot command*.
        *r0/r1/az0/az1*.
        Specifies the 'region' of interest in (*r*, *azimuth*) space. Here,
        *r0* is 0, *r1* is max length in units. For *az0* and *az1*,
        specify either -90/90 or 0/180 for half circle plot or 0/360 for
        full circle.

    diameter : str
         Sets the diameter of the rose diagram. If not given,
         then we default to a diameter of 7.5 cm.

    sector : str
         Gives the sector width in degrees for sector and rose diagram.
         Default ``'0'`` means windrose diagram. Append **+r** to draw rose
         diagram instead of sector diagram (e.g. ``'10+r'``).

    norm : bool
         Normalize input radii (or bin counts if ``sector_width`` is used)
         by the largest value so all radii (or bin counts) range from 0
         to 1.

    frame : str
         Set map boundary frame and axes attributes. Remember that *x*
         here is radial distance and *y* is azimuth. The ylabel may be
         used to plot a figure caption. The scale bar length is determined
         by the radial gridline spacing.

    scale : float or str
         Multiply the data radii by scale. E.g., use ``scale = 0.001`` to
         convert your data from m to km. To exclude the radii from
         consideration, set them all to unity with ``scale = 'u'``
         [Default is no scaling].

    color : str
         Selects shade, color or pattern for filling the sectors [Default
         is no fill].

    cmap : str
        Give a CPT. The *r*-value for each sector is used to look-up the
        sector color. Cannot be used with a rose diagram.

    pen : str
        Set pen attributes for sector outline or rose plot, e.g.
        ``pen = '0.5p'``. [Default is no outline]. To change pen used to
        draw vector (requires ``vectors``) [Default is same as sector
        outline] use e.g. ``pen = 'v0.5p'``.

    labels : str
         ``'wlabel,elabel,slabel,nlabel'``. Specify labels for the 0, 90,
         180, and 270 degree marks. For full-circle plot the default is
         WEST,EAST,SOUTH,NORTH and for half-circle the default is
         90W,90E,-,0. A **-** in any entry disables that label
         (e.g. ``labels = 'W,E,-,N'``). Use ``labels = ''`` to disable
         all four labels. Note that the :gmt-term:`GMT_LANGUAGE` setting
         will affect the words used.

    no_scale : bool
         Do NOT draw the scale length bar (``no_scale = True``).
         Default plots scale in lower right corner provided ``frame``
         is used.

    shift : bool
         Shift sectors so that they are centered on the bin interval
         (e.g., first sector is centered on 0 degrees).

    vectors : str
          ``vectors = 'mode_file'``. Plot vectors showing the
          principal directions given in the *mode_file* file.
          Alternatively, specify ``vectors`` to compute and plot
          mean direction. See ``vector_params`` to control the vector
          attributes. Finally, to instead save the computed mean
          direction and other statistics, use
          ``vectors = '+wmode_file'``. The eight items saved to
          a single record are: *mean_az*, *mean_r*, *mean_resultant*,
          *max_r*, *scaled_mean_r*, *length_sum*, *n*, *sign@alpha*,
          where the last term is 0 or 1 depending on whether the mean
          resultant is significant at the level of confidence set via
          ``alpha``.

    vector_params : str
        Used with ``vectors`` to modify vector parameters. For
        vector heads, append vector head size [Default is 0, i.e., a
        line]. See :gmt-docs:`rose.html#vector-attributes` for
        specifying additional attributes. If ``vectors`` is not
        given and the current plot mode is to draw a windrose diagram
        then using ``vector_params`` will add vector heads to all
        individual directions using the supplied attributes.

    alpha : float or str
        Sets the confidence level used to determine if the mean
        resultant is significant (i.e., Lord Rayleigh test for
        uniformity) [``alpha = 0.05``]. Note: The critical
        values are approximated [Berens, 2009] and requires at
        least 10 points; the critical resultants are accurate to at
        least 3 significant digits. For smaller data sets you
        should consult exact statistical tables.

        Berens, P., 2009, CircStat: A MATLAB Toolbox for Circular
        Statistics, *J. Stat. Software*, 31(10), 1-21,
        https://doi.org/10.18637/jss.v031.i10.

    {U}
    {V}
    {XY}
    {c}
    {i}
    {p}
    {t}
    """

    kwargs = self._preprocess(**kwargs)  # pylint: disable=protected-access

    with Session() as lib:
        # Choose how data will be passed into the module
        file_context = lib.virtualfile_from_data(
            check_kind="vector", data=data, x=length, y=azimuth
        )

        with file_context as fname:
            arg_str = " ".join([fname, build_arg_string(kwargs)])

            lib.call_module("rose", arg_str)